Stabilizers for the medical equipment

Most of producers of the medical equipment project and make the production, leaning on GOST 13109-97 according to which normally admissible value of a deviation of tension is value +/-5% of the rated voltage of an electric arch.

Unfortunately, the modern system of power supply not always corresponds to this parameter, and for especially exacting equipment tension deviation even to +/-5% are inadmissible. Lack of qualitative power supply directly affects work of any medical equipment, and, as a rule, results in its malfunction.

For example, lack of stable power supply a X-ray of installation influences correct work:

- the device X-ray feeding devices who is responsible for formation of x-ray radiation. As a result, not qualitative pictures will be received, and in case of failure of the feeding device leads to idle time an office X-ray.

- drive device X-ray. Failure of the drive a X-ray of installation leads an office X-ray to idle time, thus the cost of repair of the drive can reach thousands euros.

- refusal of separate mechanical supports leads to expensive repair and I will stay an office X-ray.

The Saturn stabilizer allows to provide protection of the medical equipment against differences of tension with high precision of correction + to/-1%, and also from the hindrances which are transferred on a network. The main advantage of "Saturn" in comparison with stabilizers of other producers is its reloading ability to 1000% that is extremely necessary for devices with big starting currents. For the three-phase equipment experts advise to install the stabilizer with the block of control of phases, for additional protection of the equipment in case of accident of one of phases.

More than in 15 years our stabilizers proved in hundreds of medical institutions, and are actively used for protection: