Electric Motor Start Control Relay ROPT
Purpose
Starting Current Limitation Relay with microprocessor management it is intended for restriction starting current at connection of inductive or capacitor loading to single-phase or three-phase network by means of the extinguishing resistors.
2 types are made:
RОPT-20-1 for single-phase network;
ROPT-20-3 for a three-phase network.
Starting Current Limitation Relay with microprocessor management it is intended for restriction starting current at connection of inductive or capacitor loading to single-phase or three-phase network by means of the extinguishing resistors.
2 types are made:
RОPT-20-1 for single-phase network;
ROPT-20-3 for a three-phase network.
Design of system
– The ROPT-20-3 relay is executed in the case for installation on a DIN lath.
– On the forward panel of the module there are indicators "L1", "L2", "L3", "NETWORK".
– In the lower and top part of a product there are terminal blocks for connection of the relay to a network and to loading.
– Power supply of the relay is carried out directly from a controlled network.
– The ROPT-20-3 relay is executed in the case for installation on a DIN lath.
– On the forward panel of the module there are indicators "L1", "L2", "L3", "NETWORK".
– In the lower and top part of a product there are terminal blocks for connection of the relay to a network and to loading.
– Power supply of the relay is carried out directly from a controlled network.