Time relay RV-200
Purpose
The RV-200 time relay is designed for connecting a load to the network by means of the external actuation mechanism with a temporary delay after power supply.
Protection class – 0, EMS in accordance with GOST P50033.92. Warranty period – 2 years.
Design and scheme of a time relay RV-200
The RV-200 time relay is arranged in the housing for its installation on the DIN-rack.
On front panel of the unit the “NETWORK” and the “RELAY” indicators and the trimming resistor knob “t, s” are located.
Power supply and internal relay contact circuits are galvanically separated.
In lower and upper parts of the unit terminal blocks for connection of the unit to the network and to the control scheme are located.
The relay is energized directly from the controlled network.
The RV-200 time relay is designed for connecting a load to the network by means of the external actuation mechanism with a temporary delay after power supply.
Protection class – 0, EMS in accordance with GOST P50033.92. Warranty period – 2 years.
Design and scheme of a time relay RV-200
The RV-200 time relay is arranged in the housing for its installation on the DIN-rack.
On front panel of the unit the “NETWORK” and the “RELAY” indicators and the trimming resistor knob “t, s” are located.
Power supply and internal relay contact circuits are galvanically separated.
In lower and upper parts of the unit terminal blocks for connection of the unit to the network and to the control scheme are located.
The relay is energized directly from the controlled network.
Technical characteristics of time relay RV-200
|
Characteristic |
Meaning |
| Power supply voltage | 220±10% В; 50 Hz |
| Range of a temporary delay |
5…200 sec |
| Delay of repeated inclusion of power, not less |
0,5 sec |
| The switched contact current (АС1 250 V) |
5 А |
| Power consumption, no more |
3 W |
| Overall dimensions of the block (1 module) |
17,5x90x65 mm |
| Weight, no more |
0,1 kg |
| Range of working temperatures (without condensate) | -40…+45 °С |