ROPT-20-1

Purpose

The relay ROPT-20-1 with microprocessor management is intended for restriction of starting current by means of the extinguishing resistors at connection of inductive or capacitor loading to a single-phase network of 220 V, 50 Hz.

Design of system

– The ROPT-20-1 relay is executed in the case for installation on a DIN lath.
– On the forward panel of the module there are indicators "NETWORK", "ACCIDENT".
– In the lower and top part of a product there are terminal blocks for connection of the relay to a network and to loading.
– Power supply of the relay is carried out directly from a controlled network. (Pict. 1)


Technical characteristics
Parameter
Value
Rated working voltage 220±20% V; 50 Hz
Rated current of loading 32 А
Time of a delay of restriction of starting current 0,04 s
The lower threshold of shutdown of loading on tension 176 V
The lower threshold of inclusion of loading on tension 184 V
The top threshold of shutdown of loading on tension 252 V
The top threshold of inclusion of loading on tension 250 V
Power consumption, no more 5 W
Overall dimensions of the module 71 х 90 х 65 mm
Weight, no more 0,3 kg
Range of working temperatures (without condensate) -10 … +45 °С


Pict.1. Standard scheme of connection of the relay PORT-20-1

Оформите заявку на расчет
X
Напишите ниже о проблеме, возникшей с нашим оборудованием
{{ ELEMENTS.length }}
{{ DATA.TOTAL_SUM }} р.
: {{ item.MODEL }}
{{ item.STATUS }}
{{ item.NALICHIE }}
{{ item.PRICE }}
{{ item.OLD_PRICE }}
- +
: {{ DATA.TOTAL_DISCOUNT_SUM }}
: {{ DATA.TOTAL_SUM }}

Наверх