OM-16

‹ ›

Purpose

The limiter of power of OM-16 is intended for control of tension and power consumption in a single-phase network and shutdowns of loading in case of tension exit for the established threshold values or excess of electricity consumption over the established value.

Design of system

– The limiter of power of OM-16 is executed in the case for installation on a DIN lath.
– On the forward panel of the block there are handles of tuning resistors, the handle of the switch of the limiter of power and NETWORK and ACCIDENT indicators.
– In the lower part of the block there are terminal blocks for connection of the block to a network and loading. (Pict. 1)

Technical characteristics

Parameter	Value
Rated voltageS	220 V; 50 Hz
Limits of regulation of tension of shutdown on the top threshold «U top»	min 230 V
	max 270 V
Limits of regulation of tension of inclusion on the lower threshold «U low»	min 150 V
	max 200 V
Time of a delay of shutdown of loading on the top threshold of tension	0,1 s
Time of a delay of shutdown of loading on the lower threshold of tension	2 s
Hysteresis of the lower threshold «DU low»=U low turn-on - U low turn-off	5 %
Values of settings of restriction of current «I(А)»	2;3;4;5;6;8;10;12;14;16 А
Temporary delay of shutdown of the relay on current (unregulated)	2 min
Time of a delay of repeated inclusion of loading after shutdown on current, «t repeat»	min: 4 s
	max: 180 s
The maximum switched current (АС1 250 В)	16 А
Range of working temperatures (without formation of condensate) max	min -10 °С
	max 40 °С
Overall dimensions of the block	34 х 90 х 65 mm
Weight, no more	0,2 kg
Section of wires for connection the blockа	1,5 mm²

Pict.1. Order of connection of the relay