Power 12-60 kVa

Advantages of stabilizers SATURN

– The autotransformer of the German firm ThalhemTrafoWerke provides high precision and smoothness of stabilization necessary for the exacting equipment.
– The payment of management on the basis of the microprocessor provides control parameters of a network of 3200 times a second, and instantly reacts to changes entrance tension.
– The motor drive of Japanese brand of Mitsubisi provides high speed.
– Works at food both from a network, and from the diesel - and the petrolgenerator.

ADDITIONAL FUNCTIONS OF THREE-PHASE VOLTAGE STABILIZERS "SATURN"

The system of protection of loading provides:

• shutdown of loading at accident of a network, at tension deviation on stabilizer exit out of limits, safe for loading, with the subsequent automatic inclusion at restoration of a network;
• protection of loading against the pulse retension caused by the storm categories, transition processes in a network, the welding equipment etc.
  

The security system provides:

• shutdown of the stabilizer at an overload and short circuit;
• control of temperature in the block and shutdown at an overheat;
• the analysis of parameters of a network and the test of system at inclusion.

Digital indication of a network:

• indication of value of entrance and output tension;
• load current;
• load capacity;
• indication by the form protective shutdown.

BYPASS system:

• provides a live broadcast in case of accident of the stabilizer for ensuring work of loading.
  

Design of voltage stabilizers

• Three-phase voltage stabilizers of SNE-T represent floor blocks. If necessary perhaps fastenings of the stabilizer on wall, the delivered set it can be added with wall fastening.
• Case elements are made of metal and painted by a wearproof polymeric covering. Color gray RAL7035.
• Cases of all voltage stabilizers of this series are unified. Models differ only in the power, range, weight and plugs connections.
• Voltage stabilizers have the unified payment of management on the basis of the microprocessor.
• The knot of electromecanics is built on the basis of the autotransformer of the German firm TTW differing in high reliability
  

RECOMMENDATIONS ABOUT THE COMPLETE SET OF THE THREE-PHASE VOLTAGE STABILIZER

• The three-phase voltage stabilizer is completed from three the single-phase voltage stabilizers connected according to the scheme "star" and working independently from each other.
• For three-phase loadings like engines, industrial refrigerators or technological lines at the exit of a voltage stabilizer it is necessary to establish the contactor with the relay of control of the phases "RKF 3/1", or to be convinced in existence of this protection in loading.
• At loss of one of phases or a distortion of phases, for any reasons, this protection will de-energize such loading in avoidance more serious accident.
• For a supply of single-phase loadings of a house (cottage) or powerful such protection not only isn't useful to the computer network, but also it is harmful. In this case loading, as a rule, consists of a set single-phase and switch-off of one of phases doesn't lead to accident of loading.

Note
A pull of tension the stabilizator is made at the expense of current on an input (law of conservation of energy). For example, by operation of the stabilizator SNE-O-8 in case of input voltage of 170 V and current of loading 40 A, the input current will be 51 A.
It is necessary to be convinced of the sufficient section of input conductors and compliance of the current protection on a network input!